In short: Headquarters often asks a Hong Kong office to box up retired laptops and send them “home”. That can make sense when the devices are still working assets that will be reused, but it is a poor default for equipment that has reached the end of its life. Since 1 January 2025, the import and export of electrical and electronic waste from Hong Kong has required a permit from the Environmental Protection Department under the Waste Disposal Ordinance, together with prior consent from the destination and any transit states under the Basel Convention. Shipping devices that still hold personal data also creates a security risk. For many end-of-life units, handling them in Hong Kong and sending headquarters the evidence is simpler than trying to export them as cargo.
This article is general information, not legal advice. Whether a particular shipment is waste or second-hand equipment is a legal and factual question for you, your counsel and, where needed, the Environmental Protection Department. Confirm the current rules before you book a shipment.
Why headquarters often wants the laptops sent back
Overseas IT, procurement or finance teams are used to seeing every retired asset come back to a central depot. Common reasons include:
- Asset tags still sit on a global inventory, and HQ wants the physical unit in front of the same team that owns the record.
- A leasing company wants the machines returned to a depot in another country.
- Someone hopes to reuse or remarket the machines at headquarters.
- A security policy says “no device leaves the company”, and shipping them inland feels like keeping control.
- Appointing a local contractor in Hong Kong looks harder than printing a courier label.
Those reasons are understandable. They do not, by themselves, make an export lawful or a good data-protection decision. A “no device leaves the company” policy can still be met by retiring the device in Hong Kong under a documented process, then closing the asset record when the evidence comes back.
The 2025 Hong Kong export control you should check first
Hong Kong implements the Basel Convention through the Waste Disposal Ordinance (Cap. 354). In May 2026, the Environmental Protection Department published an information document on how the E-waste Amendments apply in the Hong Kong Special Administrative Region.
The key points, taken from that official document and EPD’s accompanying guide, are:
- The Basel Convention E-waste Amendments took effect on 1 January 2025 and expanded control from hazardous e-waste to all electrical and electronic waste (EEW).
- Hong Kong amended the Waste Disposal Ordinance so that all EEW falls under the import and export permit system from the same date.
- Any person who imports or exports EEW must first obtain an EPD permit.
- A permit is issued only if, among other things, the competent authority of the state of import and of each state of transit has given prior consent.
- From 1 January 2025, transboundary movement of EEW between Hong Kong and non-Parties to the Basel Convention is not permitted.
- EPD encourages applicants to make contact early and to submit a completed application, with supporting documents, at least 90 days before the planned shipment date.
- Whether a permit is granted, and how long it takes, still depends in part on responses from overseas authorities.
Separately, EPD’s page on the Ordinance states that an export permit will not be issued unless, among other things, the applicant can show that the e-waste requires treatment overseas through sophisticated processes that are not otherwise available in Hong Kong. Retired office laptops, monitors and similar equipment are commonly processed here. That is one reason “just ship the waste back to headquarters for disposal” may not meet the export test, even if the destination is willing.
Official sources to read before you book freight:
- EPD information document on the E-waste Amendments (May 2026, PDF)
- EPD guidelines for waste import / export permit applications
- EPD note on waste disposal licensing and import / export permits
- Basel Convention overview of the E-waste Amendments
Enquiries about waste import and export control may be directed to EPD at wasteie@epd.gov.hk or (852) 2755 5462, as published in that information document. A courier booking, a freight forwarder’s quote, or an internal “return to HQ” ticket is not a substitute for this check.
Waste or second-hand? Do not guess from the packing list
The Basel Convention and the Waste Disposal Ordinance control wastes. EPD’s information document is clear that second-hand electronic equipment that may be proved to be non-waste is not subject to the waste import and export permit control.
EPD sets out criteria that second-hand equipment exported from or imported into Hong Kong should meet, including that:
- The equipment is not destined for disposal or dismantling.
- Essential parts are not missing, and there are no damages or defects that could impair key functions or safe use.
- The equipment is fit for direct use, and testing reports can be produced if EPD asks for them.
- It is not so worn or damaged in appearance that marketability is reduced.
- It is packed so that it is protected in storage and transit.
- There is a regular second-hand market, and, if asked, sale contracts or invoices can be shown. Equipment that uses obsolete technology with no second-hand market at the destination cannot be classified as second-hand.
EPD also says importers and exporters should run functionality tests before shipment, and should verify with the relevant authorities in the states of import and export — including environment, customs and commerce authorities — that the second-hand equipment can be legally imported or exported for sale.
This article does not classify your shipment. A stack of retired office laptops headed for a recycler, a warehouse disposal pile, or a dismantling line is unlikely to be second-hand stock. A batch of tested, working machines being sold or redeployed, with records to match, may be a different case. Get advice on the facts you actually have.
Data risk is a separate question from the shipping permit
Even if a shipment can move as cargo, devices that still hold personal data or company information should not be treated as ordinary parcels.
Under Hong Kong’s Personal Data (Privacy) Ordinance, data users must take all practicable steps to protect personal data against unauthorised or accidental access, processing, erasure, loss or use, including when equipment is being retired. We discussed retention, disposal timing, and the difference between the PDPO’s purpose-limitation principle and specific tax or accounting retention periods, in PDPO data retention and IT disposal in Hong Kong. This page does not repeat that legal analysis, and it does not advise on whether section 33 or any other cross-border data rule is in force.
Practically:
- A courier or freight movement adds handlers, transit points and the chance of loss or delay.
- A “factory reset” or quick format is often not enough for a hard disk or SSD.
- Backup tapes, USB drives, and copier or multifunction printer drives packed “with the laptops” are easy to miss.
- If the reason for sending devices to headquarters is reuse, agree the sanitisation standard and the evidence you need before the goods leave Hong Kong.
- If the reason is disposal, it is usually cleaner to complete erasure or physical destruction in Hong Kong and send headquarters the records, rather than send data-bearing waste across a border.
For the evidence trail itself — serial inventory, handover records, exceptions, and how those sit with a certificate — see hard drive chain of custody in Hong Kong and HKRT’s certificate of destruction page.
When local handling in Hong Kong is usually the simpler path
Local handling is often the better default when:
- The devices are end-of-life, broken, incomplete, or intended for dismantling or recycling.
- You do not have functionality-test records or a genuine reuse or resale plan at the destination.
- The destination or a transit state is a non-Party to the Basel Convention, or you have not confirmed consent.
- You cannot allow 90 days, or longer, for a permit review that may still be refused.
- The equipment can be processed in Hong Kong, so an export-permit case based on “treatment not available here” is hard to justify.
- Headquarters mainly needs audit evidence, not the physical machines.
In those cases, a practical sequence is:
- Freeze a serial inventory while the assets are still in the Hong Kong office or store.
- Decide, in writing, which units are candidates for reuse and which are for secure end-of-life handling. Do not mix the two in one anonymous carton.
- For end-of-life units, appoint a local contractor, agree the method and the evidence, and complete the work in Hong Kong.
- Close the global asset record against the same serials, with the certificate or erasure report and the handover trail.
- Only then consider whether any remaining working units genuinely qualify for a second-hand shipment, and check the export and import rules before booking freight.
Overseas teams that want to brief a Hong Kong job from headquarters can follow the practical steps in Hong Kong ITAD for overseas companies.
What HKRT can help with — and what this article does not promise
Hong Kong Recycling Trading Company Limited (HKRT) can collect retired IT equipment in Hong Kong, handle data-bearing media under an agreed method, and provide documentation for overseas auditors. The company holds ISO 9001, 14001, 27001 and 45001 management-system certifications. Those certifications are not a waste disposal licence, an e-waste export permit, or a government appointment.
This article does not:
- Classify a shipment as waste or as second-hand equipment.
- Offer to obtain, or claim that HKRT holds, an EPD import or export permit.
- Promise a processing time, a price, a destruction size, a same-day collection, or that every method is available for every job.
- Give legal advice on the Basel Convention, the Waste Disposal Ordinance, or the PDPO.
- Describe or illustrate the operating method of destruction equipment.
If you already have a list, a location in Hong Kong, and a note on whether headquarters wants reuse or end-of-life evidence, send that and we will reply with a plan and a quote for work in Hong Kong.
Planning a laptop or office-IT retirement in Hong Kong?
Send us your asset list or a rough count and location, and whether headquarters needs the devices themselves or the disposal evidence, and we will reply with a plan and quote for work in Hong Kong.
Hong Kong Recycling Trading Company Limited (HKRT)
Frequently asked questions
Do I need an EPD permit to ship used laptops from Hong Kong to headquarters?
If the shipment is electrical and electronic waste, yes: since 1 January 2025 you must first obtain an EPD import or export permit, and the destination and any transit states must have given prior consent. Second-hand equipment that can be proved not to be waste is outside that permit control, but it must meet EPD’s published criteria and the destination’s own rules. This is general information, not a classification of your shipment.
What is the difference between second-hand equipment and e-waste under these rules?
EPD’s information document says the Ordinance and the Basel Convention control wastes. Second-hand equipment should be destined for use, not disposal or dismantling; it should work, or have been properly repaired, be complete and safely usable, be fit for direct use, and have a regular second-hand market at the destination. Functionality-test records may be requested. Equipment that is obsolete, incomplete, or headed for a recycler is not made “second-hand” by writing that word on a carton.
Can I send retired laptops in a courier parcel to avoid freight controls?
No. The permit control applies to the import or export of EEW, not only to a particular type of bill of lading. A courier movement can also increase the chance that data-bearing devices are lost or opened in transit. Check the legal position first; do not treat a small parcel as an exemption.
Should data be removed before any device leaves Hong Kong?
If the devices still hold personal data or sensitive company information, you should take all practicable steps to protect that data. For end-of-life units, completing agreed erasure or destruction in Hong Kong and sending the records is usually cleaner than shipping live media. For genuine reuse, agree the sanitisation standard and the evidence before the goods move. A quick format is often not enough.
Does HKRT arrange export permits or ship e-waste overseas for clients?
No. This article does not claim that HKRT holds or obtains EPD import or export permits, or that it will export your e-waste to headquarters. HKRT’s role described here is local collection, agreed handling in Hong Kong, and documentation for your file. Permit applications, where they apply, are a matter between the applicant and EPD.
How early should we start if the shipment may be controlled waste?
EPD encourages applicants to make contact early and to submit a complete application at least 90 days before the planned shipment date. Timing still depends on overseas authorities, and a permit may not be issued. Build that into any “return to HQ” plan, or choose local handling instead.
