In short: When a Hong Kong office has to return leased photocopier or MFP equipment to the vendor or lessor, the machine often has to go back complete and in working order. The same applies to a single multifunction printer. That is a different problem from recycling a printer the company owns, and it is not the same as returning leased laptops. The storage inside the machine — if it has any — may still hold address books, stored jobs, mailboxes, scan-to-folder credentials or print logs. Returning the hardware does not, by itself, end the organisation’s duty to protect personal data still stored on it. Confirm the vendor’s or lessor’s rules in writing before anyone opens panels, runs an initialise routine, or attempts to remove media.
This article is general information, not legal advice, and it is not a summary of any particular lease. Contracts and return programmes differ. Not every photocopier or MFP has a hard drive. Check the schedule in front of you, and ask the vendor to confirm the storage rules in writing, before you change the hardware.
Why a photocopier lease return is different from disposing of an owned printer
If you own the printer, you can usually decide whether it is reused, recycled, or retired with its storage. A lease or rental return is tighter than that.
You typically do not own the chassis, and often you do not own the storage either. Many return conditions expect the unit to be complete, functional, and ready for the vendor’s collection team. Opening panels, removing a drive, substituting blank media, or returning a machine that will not start can lead to missing-parts or repair charges — but only the vendor or lessor can tell you what your contract actually allows.
At the same time, the machine may still hold names, telephone numbers, stored faxes or copy jobs, user mailboxes, scan-to-folder or scan-to-email credentials, and print or job logs. Handing the photocopier to a collection team does not wipe that information. It also does not transfer your organisation’s responsibility for it.
This is not the same decision as returning leased laptops, PCs or servers to an IT lessor. The storage, the access method, and the party that collects the machine are often different. It is also not the same as shipping owned, retired laptops back to headquarters. A vendor collection from a Hong Kong office, with the machine going back to a local depot or rental programme, is usually not an export. Nor is this a general briefing on how an overseas headquarters arranges ITAD in Hong Kong — that page only mentions lease returns in passing. The question here is narrower: what should happen to the storage, and to the other data the machine may hold, before the vendor collects it.
Confirm the vendor’s or lessor’s rules in writing before you touch the hardware
Do not assume that every vendor will accept drive removal, a particular erasure method, or a control-panel “factory reset” or “initialize all data” routine. Ask for written confirmation, ideally tied to the contract, asset schedule or rental agreement, on at least the following:
- Must the original storage remain inside a complete, working machine?
- If sanitisation or erasure is allowed with the storage left in place, which method or evidence (if any) will the vendor accept, and which will it reject?
- If your security policy requires the original media to be retained or destroyed, may it be removed or replaced, who is allowed to open the unit (a vendor technician, your staff, or a contractor), and who supplies and pays for any replacement?
- What should happen to address books, user mailboxes, stored fax or print jobs, scan-to-folder or scan-to-email credentials, and job or print logs?
- Must the machine be unenrolled from fleet management, print-accounting software, or the vendor’s remote-monitoring account so it is not tied to your tenant after it leaves?
- What accessories must go back with the unit — finishers, cabinets, stands, trays, keys, meter or access cards, or documentation?
- Where and when will collection happen, and who signs for the asset?
Manufacturer rental programmes and local leasing firms all run their own return processes, and those processes can differ by vendor, contract and year. A brochure, a technician’s informal comment, or a colleague’s experience on another floor is not a substitute for written confirmation on this machine. If the answer is unclear, do not open the hardware while you wait.
What may actually be stored — and why “the drive” is not the whole story
It is a mistake to start from the idea that every leased photocopier has a hard drive, or that the only risk is a removable disk. The storage, if any, varies by model and age.
Some machines have a conventional hard disk drive. Some use a solid-state drive or other flash memory. Some have only limited, embedded storage, or no user-accessible media that a non-vendor technician can reasonably identify. Fax memory, address books and stored jobs may exist even when no obvious drive is present. Do not invent a drive that is not there, and do not assume that the absence of a visible disk means there is nothing to clear.
Before collection, it is worth asking — and recording — whether the following are present and what will be done with them:
- Address books, speed dials and stored destination lists.
- Confidential print, stored copy or fax jobs, and user mailboxes or document boxes.
- Scan-to-folder, scan-to-email, FTP or SMB credentials, and related network paths.
- Print logs, job logs, and any locally stored user-authentication directory.
- Fax memory and retransmission buffers, where the machine has a fax function.
- Admin or service passwords that your team set, and any enrolment in a print-management or vendor remote-service platform.
If a setting or mailbox cannot be opened without a vendor passcode, say so in the record rather than guessing that it has been cleared. The aim is an accurate picture of what the machine may still hold, not a claim that every MFP stores the same things.
Typical options for the storage — and the trade-offs
Once the vendor’s or lessor’s position is in writing, most Hong Kong offices are choosing among a small set of options. None of them is automatically right for every contract, and none of them should be chosen just because it is familiar from laptop returns.
1. Sanitisation or software erasure, leaving the machine intact
If the vendor requires a complete, working machine, an agreed in-place sanitisation of the installed storage is often the option that conflicts least with the return condition. The chassis stays together, the original media stays in place, and you should still keep a record that can be matched to the machine.
What “in-place” actually means depends on the model and on what the vendor has accepted in writing. It may be a vendor-documented initialise or overwrite routine, carried out with evidence you can keep. Where the storage is a standard, accessible drive and the lessor has agreed, verified software erasure of the kind described in our guide to data erasure with licensed Blancco software may also be an option.
Many copiers and MFPs, however, use vendor-controlled or embedded storage. A method that works on a laptop drive is not automatically available, and it should not be promised until the media and the written rules have been reviewed. HKRT uses licensed Blancco software ourselves on IT assets where that method is suitable; we are not an official Blancco partner or certified centre, and we do not act on Blancco’s behalf.
A completed routine on a working machine is not the same thing as a promise that every vendor will accept that method. Tell us the standard your policy names, and what the vendor has confirmed, before the work is planned. Media or jobs that could not be verified should not be treated as clean.
2. Drive removal or replacement — only if the contract allows it
Some security policies say the original media must never leave the company’s control. That can be a workable policy for equipment you own. On a leased photocopier it is only workable if the vendor has agreed, in writing, that you may remove the original storage and, if required, fit a replacement so the unit can still be returned in working order.
Two further limits matter in practice. First, not every leased MFP has a user-accessible drive: the storage may be embedded, limited, or simply not present in the form people expect. Second, even where a drive exists, it is often caged, locked, or intended to be opened only by a vendor technician. Swapping it without approval can still breach the return condition, and forcing panels open can damage a machine you do not own. If removal is not permitted, plan for in-place handling the vendor has accepted — do not take the hardware apart on an assumption.
3. Relying on the vendor’s own sanitisation programme
Some vendors offer to initialise or sanitise the machine at collection, or at a depot afterwards. That may be useful, but it is still your organisation’s data until you are satisfied that the arrangement meets your policy. Read what the programme actually covers, on which models, in which locations, and what evidence you will receive. Do not treat “the vendor will handle it” as a clearance you have already performed.
A factory reset, a simple initialise, a quick format, or deleting user boxes is not something this article can treat as sufficient on its own. The Privacy Commissioner for Personal Data (PCPD) has stated that simple file deletion or reformatting of hard drives and USB memory devices is not a reliable method of deletion, because the data can often be recovered with commonly available software. Dedicated erasure software, or another method that matches the media, is the approach the guidance points to. An MFP “reset” may also leave address books, fax memory, stored jobs or scan credentials in places a casual reset does not cover. Confirm with the vendor what their procedure actually clears, and keep evidence.
Physical destruction of the original storage, or degaussing, will usually make a working return impossible unless the vendor has already agreed to a replacement. Degaussing also applies to magnetic hard disk drives, not to typical SSDs or other flash storage. Do not choose a destructive method just because it is familiar, and do not assume it is allowed.
What to record: machine serial versus storage serial
A vendor’s collection note often identifies the photocopier by machine serial or asset tag. Your security and privacy file needs more than that if the question later is “what happened to the storage, the address book, and the stored jobs?”
For each machine, record at least:
- Asset tag and machine serial number, as shown on the chassis and on the lease or rental schedule.
- Model, and the storage type if it can be identified (hard disk, SSD or flash, embedded, unknown, or not found). If no user-accessible storage is found, say so rather than inventing a drive.
- The storage serial, where it can be read. If the media is caged, vendor-locked or unreadable, record that fact instead of a guessed number.
- Whether the original storage was left in place, replaced with written approval, or could not be accessed.
- The sanitisation, erasure or other handling method actually used, the date, and the report, certificate or vendor procedure reference.
- Whether address books, mailboxes, stored jobs and scan or network credentials were cleared, could not be opened, or were handled by the vendor — and how you know.
- Who handed the unit over at collection, and any discrepancy against the vendor’s list.
If a replacement drive was authorised, keep the written approval together with both serials — the media that left your control and the media that went back in the machine. For the wider evidence trail that auditors often ask for, see hard drive chain of custody in Hong Kong.
Clear address books, credentials and fleet enrolment before collection
A wiped or locked MFP that the vendor cannot service, meter or remarket can still fail a return condition. Clearing data is not the same as leaving the machine enrolled in your tenant. Before collection, your IT or office team should, in line with your own procedures and the vendor’s current documentation:
- Back up any address books, stored jobs or logs you are still required to keep, then remove them from the machine.
- Clear scan-to-folder, scan-to-email, FTP or SMB credentials, and any other saved destinations or network paths.
- Unenrol the machine from print-management, print-accounting or vendor remote-monitoring accounts, so it is not tied to your organisation after it leaves.
- Deal with admin or service passwords you control in the way the vendor has asked for in writing — a machine the collection team cannot operate can still be a problem.
- Gather the accessories the contract says must be returned, and note anything missing before the collection team arrives.
This article does not give model-by-model key sequences. Use your own procedures and the current documentation for the machine in front of you. If counsel has placed a legal hold on the device or on data it may contain, do not wipe, destroy or return that unit until the hold is lifted or you have written instructions. That is a practical caution, not legal advice.
Returning the photocopier does not end your data-protection duty
Hong Kong’s Personal Data (Privacy) Ordinance (PDPO, Cap. 486) requires a data user to take all practicable steps to protect personal data against unauthorised or accidental access, processing, erasure, loss or use (Data Protection Principle 4(1)). The PCPD has noted that this duty also applies to the handling of obsolete information technology storage equipment for disposal or recycling. The same Ordinance requires all practicable steps to ensure that personal data is not kept longer than necessary for its purpose, including any directly related purpose (DPP2(2)), and, when the data is no longer required, all practicable steps to erase it, unless a legal or public-interest exception applies (section 26).
Those purpose-based rules are not a blanket retention period for every address book entry, stored job or log on an MFP. They are also not the same as specific statutory record-keeping duties. The Inland Revenue Department states that records required under section 51C of the Inland Revenue Ordinance shall be retained for a period of not less than seven years. Decide what must be kept — and where it will be kept — before any storage is erased or any mailbox is cleared. For the distinction between PDPO retention and tax or company record-keeping, see PDPO data retention and IT disposal in Hong Kong.
Official sources: PCPD, Guidance on Personal Data Erasure and Anonymisation (April 2014 revision); IRD, Record Keeping.
A short distinction: a leased photocopier is not a leased laptop
This guide is about returning a leased photocopier or MFP, complete, to the vendor or lessor that owns it. Returning leased laptops, PCs or servers is a different job: the lessor, the storage, and the usual handling options are not the same, and that page should not be used as a stand-in for a copier return. Shipping owned equipment out of Hong Kong is a third decision, and a local vendor collection is usually not an export.
This page is also not a general “how to destroy a copier hard drive” article. The question for most overseas and regional teams is what you may do with the storage while still returning a working machine, what to get in writing, and what evidence to keep. If your contract actually allows the original media to be retained or destroyed, that is a separate, written decision — not the default.
What HKRT can and cannot promise
Hong Kong Recycling Trading Company Limited (HKRT) can help a Hong Kong office prepare a leased photocopier or MFP for return, once you have the vendor’s written position and your own retention decisions. In a typical job that may include:
- Helping you frame the written questions to put to the vendor or lessor.
- Logging the machine serial and, where it is readable, the storage type and serial — or recording that the storage is caged, unreadable, or not found.
- Where the media and the written rules allow it, agreed in-place handling and a record of what was done, including verified software erasure with licensed Blancco software when that method actually applies to the storage in front of you.
- A clear record of address books, mailboxes, stored jobs or credentials that were cleared, could not be opened, or did not match the list.
We do not promise, and this article does not claim:
- That every vendor or lessor will accept drive removal, a replacement drive, or a particular sanitisation or erasure method.
- That every leased photocopier or MFP has a hard drive, or that the storage can be removed.
- That we can open a vendor-caged unit without the vendor’s written approval.
- A factory reset, a price, a turnaround time, or same-day collection.
- That a particular destruction process is available or guaranteed for every MFP.
- That HKRT is an official Blancco partner or certified centre.
- That ISO 9001, ISO 14001, ISO 27001 or ISO 45001 is a waste-processor or e-waste disposal licence. They are management-system certifications.
- Legal advice on your lease, the PDPO, or a legal hold.
If you already have a model list, the Hong Kong location, the collection date, and the vendor’s written storage rules — or a note that you still need help framing those questions — send that and we will reply with a plan and a quote for work in Hong Kong.
Preparing a leased photocopier in Hong Kong for vendor collection?
Send us the model list or a rough count and location, the collection date if you have it, and any written vendor or lessor rules on the storage, and we will reply with a plan and quote for work in Hong Kong.
Hong Kong Recycling Trading Company Limited (HKRT)
Mon–Sat 9:00–18:00 (Hong Kong time). 24-hour emergency enquiry.
Frequently asked questions
Can we remove the drive before the vendor collects a leased photocopier in Hong Kong?
Only if the lease or the vendor has allowed it in writing. Many return conditions expect a complete, working machine. Not every MFP has a user-accessible hard drive; some use SSD or flash, some have limited or no user-accessible storage, and many drives are caged or vendor-controlled. Confirm first; do not open panels or remove media on an assumption.
Is a factory reset or initialise enough before a photocopier lease return?
Do not treat a control-panel factory reset, a simple initialise, or deleting user boxes as sufficient on its own. The PCPD has said that simple file deletion or reformatting of hard drives and USB memory devices is not a reliable method of deletion. An MFP reset may also leave address books, fax memory, stored jobs or scan credentials in places a casual reset does not cover. Use a method that matches the media and your policy, confirm what the vendor will accept, and keep evidence.
Does returning a leased photocopier end our duty to protect personal data stored on it?
No. Returning the machine to the vendor or lessor does not, by itself, end the organisation’s duty to protect personal data still stored on it. Under the PDPO, data users must take all practicable steps to protect personal data and, when it is no longer required for its purpose, to erase it, subject to legal exceptions. See our PDPO retention guide and the PCPD erasure guidance.
What should we record if the machine is returned complete?
Record the machine serial or asset tag and, where it can be read, the storage type and serial; note if the storage is caged, unreadable, or not found; keep the erasure report, vendor procedure name, or other handling reference; record that address books, mailboxes, stored jobs and scan credentials were cleared or could not be; and note who handed the unit over at collection. A vendor receipt for the machine alone may not show what happened to the storage.
Does every leased photocopier have a hard drive?
No. Some machines have a hard disk drive, some use SSD or flash, and some have limited or no user-accessible storage. Fax memory, address books, stored jobs, mailboxes, scan-to-folder credentials and print logs may still exist even when no obvious drive is present. Check the actual model, and record what you found rather than assuming a drive is there or that nothing is stored.
How is this different from returning leased laptops, or from recycling a printer we own?
A photocopier lease return is a return of the vendor’s or lessor’s machine, often under a complete-and-working condition. Returning leased laptops, PCs or servers is a different device class, usually to an IT lessor. Recycling a printer the company owns is a disposal decision, not a vendor collection. A local vendor collection in Hong Kong is usually not an export. See our guides on returning leased laptops and on shipping owned, retired laptops back to headquarters.
